Details

---

Overview

Basic Set:

• BM-16 beveling machine without accessories (see list below)
• Metal box
• 32mm flat wrench
• Allen wrench hex s=5
• Allen wrench hex s=14
• Operator’s Manual (English)

• PMT-GLW-000011 – Milling head for rounding
• PMT-PLY-000159 – Cutting insert R3 (4pcs required)
• PMT-PLY-000160 – Cutting insert R4 (4pcs required)
• PMT-PLY-000161 – Cutting insert R5 (4pcs required)
• PMT-GLW-000010 – Milling head 22,5°
• PMT-GLW-000005 – Milling head 30°
• PMT-GLW-000009 – Milling head 37,5°
• PMT-GLW-000006 – Milling head 45°
• PMT-GLW-000008 – Milling head 55°
• PMT-GLW-000007 – Milling head 60°
• PMT-PLY-000162 – Cutting insert for steel (5pcs required)
• PMT-PLY-000195 – Cutting insert for aluminum (5pcs required)

• PMT-SRB-000289 – Insert Screw
• PMT-SRB-000290 – Insert Screw (Radius)
• PMT-RLK-0509-03-00-00-0 – Guiding roller
• PMT-SMR-000005 – Screw grease (5 g) Carbon brush for 115 V
• Carbon brush for 230 V

​

Technical Specification

Power supply	220-240 V / 50-60 Hz or 110-120V / 60Hz
Motor	2200W
Spindle speed (without load)	1800–5850 rpm
Maximum bevel width	b=16 mm (0.63’’ Fig. 1)
Bevel angle (depending on milling head)	= 22.5° ; 30° ; 37.5° ; 45° ; 55° ; 60° (Fig.1)
Minimal diameter of countersinking	ca 40 mm (1.57’’)
Rounding edges	R3 ; R4 ; R5 (Fig. 2)
Dimensions (L x W x H)	585 mm (23.0’’) × 156 mm (6.1’’) × 238 mm (9.4’’) 10
Weight (without milling head)	kg (22 lbs)
Product code (220-240 VAC)	PMT-UKS-0509-10-20-00-0

Milling head for BM-16:



BM-16 dimension: